Basic Info
Model No.: ondulada
Tile Type: Colored Steel
Certification: SGS, CE, ISO, Other
Condition: New
Customized: Customized
Usage: Roof, Wall, Other
Transmission Method: Electric
Additional Info
Packaging: standard overseas packing
Productivity: 40sets Per Month
Brand: jcx
Transportation: Ocean,Land
Place of Origin: China Hebei
Supply Ability: 40sets Per Month
Certificate: CE, ISO
HS Code: 84552210
Port: Tianjin
Product Description
Steel profile Double Layer Roll Forming Machine
steel profile double layer Roll Forming Machine is your best opition,if you are considering save cost and space.This machine can make two designs,top and bottom.
A double layer roll forming machine has two layers or two levels of roll forming parts which gives it another name dual level roll forming machine, and because this machine makes two metal sheets, and double sheet roll forming machine is also a familiar name to people. The shortage of double layer machine is :two designs can not be made at same time,cause they share one motor and control box.
It is composed of Manual Decoiler,material feeding,main forming and automatic cutting.the final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously.
fd433c78b0869f524c8300b57e.jpg" title="Corrugated Steel Profile Machine" alt="Corrugated Steel Profile Machine" />
82984ac261f1b60f7b720f45bc.jpg" title="Corrugated" alt="Corrugated" />
Capacity: 5 tons
Material: #45 steel quenched
Maximum inner diameter: 508mm
Manual un-coiler
Maximum width of coil: 1250mm
L*W*H: 1600mm*920mm*1300mm
Stations: 16
Rollers material: S45C. Chrome coated: 0.03-0.05mm, Strength (MPA): 235 MPA
Shaft: diameter 75mm, material is #45 steel. Quenched hot treatment.
Bearing brand: FAG Germany
Main motor: 5.5KW, 220V, 50HZ, 3 Phases (OMD Brand)
Transmission by chain
Station material: cast steel
Machine is equipped with cooling system
Touch screen brand: Delta
PLC brand: Delta
Inverter brand: Delta
Main components for low pressure electricity: Schneider Germany
Encoder: Omron
Length: 6 meters
Drive type: rollers
Cutting type: hydraulic cutting with servo motor
Motor: 4KW, 220V, 50HZ, 3 Phases
The material of knives: SKD11
Pump motor: 5.5KW, 220V
Tolerance of length: ±0.5mm
Material: Color plate coil
Galvanized steel: 0.25-0.8mm
15.8m*1.55m*1.86m
15-20m/min (including cutting)
Product Categories : Roof And Wall Panel Roll Forming Machine > Double Layer Roll Forming Machine