Basic Info
Model No.: kr-18
Item: Kr18 Standing Seam Roll Forming Machine
Usage: Sranding Seam Roof
Mateiral: Galvalume,color Coated Galvanized Steel
Thickness Of Material: 24,22gauge
Driving Of Machine: By Chain
Motor: Siemens
Color Of Machine: By Chain
Operation: PLC Control
Diameter Of Chain: One Inch
Additional Info
Productivity: 30sets/Month
Place of Origin: China
Supply Ability: 30sets/Month
Product Description
Mobile Kr18 Standing Seam Roll Forming Machine
Roll formingmachine has many advantages over press brake . If you are not familiar with what roll forming can do for your bottom line, here are just a few of the savings you can expect...
·
No Expensive Shipping and Crating of Long Panels
(Have coils delivered right to your shop or jobsite)
No Panel Shipping Damage and Extensive Delays
(Just try to order one replacement panel from the factory)
Less Labor to save cost and Waste
(Run your panels to the exact length without time and material waste)
Work On Your Own Schedule - Not The Factory's
(When roof is ready -- just run your panels)
Form Perfect Panels To Any Length
(Form long panels at the site or on the roof without crating problems)
Automatic machine with PLC control,different length canbe done
TECHNICAL PARAMETERS
Standing seam roof panel specification:
1)Material:galvanized coil,ppgi,cooper,aluminium,al-mg-mn alloy
2) Thickness of material:22 &24&26 gauge
3)Yield strength:235-340mpa)
1.Main technical conditions of the forming line:
Temperatura: -10 ºC ~ 35 ºC(Temperature:-10ºC~35ºC)
Voltage:110volt 60Hz or 220volt 60Hz(or according to customer request
Air pressure:0.6~1.2Mpa
Total Power:≈4.5kw)
Color:
Production capacity:0-15meters/min(without cutting)
Dimension (L*W*H): L≈ 1.6 m, W≈ 1.5 m, H≈ 1.2 m
1.Flow Chart of roll forming machine:)
2.Main components:
| No. | Components Name | Unit Set/Pcs | Marks |
| 1 | 3-4 tons manual uncoiler | 1 | |
| 2 | Feeder | 1 | |
| 3 | Roll Forming Machine | 1 | |
| 4 | Electrical control system | 1 | |
| 5 | Hydraulic Guillotin | 1 | |
| 6 | Electric seamer | 1 | |
| 7 | Receiving table | 1 | |
| 8 | Bending Machine | 1 | |
| 9 | Spare parts | 1 | |
| 10 | Technical Manual | 1 | |
| 11 | Customized container | 1 | |
3.Photos of Machine:
928caf26566590798923967ecc.jpg" title="standing seam roll forming machine" alt="standing seam roll forming machine" />
4.Technology parameters:
Length:4.2M
Width:1.2M
Height:1.3M
Weight: about 2.5-3Tons
Feeding width : 610mm
Effective width: 457mm
Thickness: 0.5-0.8mm
Power plant:gasoline diesel engine 15HP
Battery:12 Volt DC*2
Drive System: All hydraulic pump with engine
Working speed:10-13 m/min
Material of rollers: Good 45# steel, rigid chrome coated
Material of roller shafts: 45# steel, quenched HRC 58-62
Material of cutting blade: Cr12 steel
Forming station: 9-11 rollers coated with hard chromium.
Controlling: Handle controller
Transmission:Chain Gear
Cutting:Hydraulic system
Material:PPGI,Galvanized
Product Categories : Standing Seam Roof Roll Forming Machine > Kr18 Standing Seam Forming Machine