Basic Info
Model No.: kr18
Additional Info
Productivity: 30sets/Month
Place of Origin: China
Supply Ability: 30sets/Month
Product Description
Kr18 Standing Seam Roof Roll Forming Machine
Kr18 Standing seam roof portable forming machine is used a lot in Mexico,most of customers use the machine at worksite.
It is composed of Manual Decoiler,material feeding,main forming part,automatic cutting system.
The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously
Kr18 Standing seam Roof Roll Forming Machine
TECHNICAL PARAMETERS
Standing seam roof panel specification:
1)Material:galvanized coil,ppgi,cooper,aluminium,al-mg-mn alloy
2) Thickness of material:22 &24&26 gauge
3)Yield strength:235-340mpa)
1.Main technical conditions of the forming line:
Temperatura: -10 ºC ~ 35 ºC(Temperature:-10ºC~35ºC)
Voltage:110volt 60Hz or 220volt 60Hz(or according to customer request
Air pressure:0.6~1.2Mpa
Total Power:≈4.5kw)
Color:
Production capacity:0-15meters/min(without cutting)
Dimension (L*W*H): L≈ 1.6 m, W≈ 1.5 m, H≈ 1.2 m
1.Flow Chart of Roll Forming Machine:)
2.Main components:
| No. | Components Name | Unit Set/Pcs | Marks |
| 1 | 3-4 tons manual uncoiler | 1 | |
| 2 | Feeder | 1 | |
| 3 | Roll Forming Machine | 1 | |
| 4 | Electrical control system | 1 | |
| 5 | Hydraulic Guillotin | 1 | |
| 6 | Electric seamer | 1 | |
| 7 | Receiving table | 1 | |
| 8 | Bending Machine | 1 | |
| 9 | Spare parts | 1 | |
| 10 | Technical Manual | 1 | |
| 11 | Customized container | 1 | |
3.Photos of Machine:
4.Technology parameters:
Length:4.2M
Width:1.2M
Height:1.3M
Weight: about 2.5-3Tons
Feeding width : 610mm
Effective width: 457mm
Thickness: 0.5-0.8mm
Power plant:gasoline diesel engine 15HP
Battery:12 Volt DC*2
Drive System: All hydraulic pump with engine
Working speed:10-13 m/min
Material of rollers: Good 45# steel, rigid chrome coated
Material of roller shafts: 45# steel, quenched HRC 58-62
Material of cutting blade: Cr12 steel
Forming station: 9-11 rollers coated with hard chromium.
Controlling: Handle controller
Transmission:Chain Gear
Cutting:Hydraulic system
Material:PPGI,Galvanized
Product Categories : Standing Seam Roof Roll Forming Machine > Kr18 Standing Seam Forming Machine