Basic Info
Model No.: weatherboard
Additional Info
Productivity: 40sets Per Month
Place of Origin: China Hebei
Supply Ability: 40sets Per Month
Certificate: CE, ISO
HS Code: 8455221000
Product Description
Exterior Wall Cladding Roll Forming Machine
Weather board sheet is used for exterior wall cladding.This design is used a lot in Australia,New zealand,PNG etc.Now people use steel sheet to replace plastic one or wood one.Our exterior wall cladding Roll Forming Machine is designed to product werather board sheet.It is composed of Manual Decoiler,material feeding table,main roll forming,and automatic cutting.
The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously
Picture show
Specifications
1.PLC computer control
2.no noise,no shake
3.hydraulic system,long operating
4.easy operation
5.maintenance-free
| NO. | ITEM | PARAMETER | NOTE | |
| 1. | Suitable material | Type | Pre-painted sheet, Galvanized sheet | |
| Width(mm) | 450mm | |||
| Thickness(mm) | 0.4-0.5mm | |||
| Yield stress(mm) | G220-G300 | |||
| 2. | Product specifications | Detail as the attached file | ||
| Length | Any length | |||
| 3. | Power requirement | Type | 220v/380v/3ph/50hz | Motor brand shanghai Lichao |
| Main Motor power | 5.5kw | |||
| Cutter power | 4kw | |||
| 4. | Forming speed(m/min) | 10-15m/min | Not include the time of cutting | |
| 5. | Manual Decoiler (Optional) | Type | Manual | |
| Max capacity | 5t | |||
| Suitable coil OD(MM) | 1000 | |||
| Suitable coil ID(MM) | 508 | |||
| 6. | Forming stand | 13 | Depend on actual design | |
| 7. | Thickness of structure | 16mm | ||
| 8. | Forming shaft diameter(mm) | 70 solid | ||
| 9. | Type of cutting | Roll formed and length-set cutting | ||
| 10. | Control system | Panasonic PLC and inverter | ||
| 11. | Install dimension(depend on the final design) | 8.2m×1.5m×1m | Without panel length | |
| 12. | Total weight (Approx) | 5.5T | Depend on final design | |
Introducation
- This machine is made up of roll forming machine,molding press,cutting machine,PLC computer control and hydraulic system
- The machine is stable,no noise,no shake
- Controlling by computer, PLC display, operation is easy, running is steady and reliable,endurable, maintenance-free
- cutting machine is characterized by stable driving, easy operation
- hydraulic system use the CDF-10 hydraulic pump, long operating life,no noise
- this machine is applies to roof fortification
Flow chart:
Decoilling the sheet--sheet guilding--film covering--roll forming--measure length--cutting the panel--panel to the supporter
Machine Feature:
1.Precise forming
2. High-solid forming stand guarantees the goods and uniform high quality of final productd
3. The operation automatically minimizes the tolerance of cutting length
Products Feature:
1. A stylish and attractive design, giving the apperance of a traditional roof tile.
2. Resistant to frost, heat,hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models.
3.The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa,civil construction etc.
Product Categories : Roof And Wall Panel Roll Forming Machine > Wall Panel Roof Forming Machine